Install and configure Stripe prerequisites

Last updated:
Edit on GitHub

To install and configure the prerequisites for the Stripe App, take the following steps.

Fulfill Stripe’s prerequisites

Fulfill ACP prerequisites

  • Connect your Stripe account to the Spryker Platform account. Request this link by creating a support case.
  • Enable ACP in your project. For instructions, see App Composition Platform installation. Make sure you are using the latest version of the Message Bus. We’ll verify this during onboarding, and a migration may be necessary to enable the Stripe app.

Install packages and add configuration

  1. Install the required packages. To check the list of required packages, in the Back Office, go to Apps>Stripe.

  2. Add or update the shared configs:

config/Shared/config_default.php 
//...

use Generated\Shared\Transfer\PaymentCaptureFailedTransfer;
use Generated\Shared\Transfer\CapturePaymentTransfer;
use Generated\Shared\Transfer\PaymentCapturedTransfer;
use Generated\Shared\Transfer\AddPaymentMethodTransfer;
use Generated\Shared\Transfer\DeletePaymentMethodTransfer;
use Generated\Shared\Transfer\PaymentAuthorizationFailedTransfer;
use Generated\Shared\Transfer\PaymentAuthorizedTransfer;
use Spryker\Shared\MessageBroker\MessageBrokerConstants;
use Spryker\Shared\Oms\OmsConstants;
use Spryker\Shared\Payment\PaymentConstants;
use Spryker\Shared\Sales\SalesConstants;
use Spryker\Zed\MessageBrokerAws\MessageBrokerAwsConfig;
use Spryker\Zed\Oms\OmsConfig;
use Spryker\Zed\Payment\PaymentConfig;

//...
$config[PaymentConstants::TENANT_IDENTIFIER] = getenv('SPRYKER_TENANT_IDENTIFIER') ?: '';

$config[OmsConstants::PROCESS_LOCATION] = [
    //...
    OmsConfig::DEFAULT_PROCESS_LOCATION,
    APPLICATION_ROOT_DIR . '/vendor/spryker/sales-payment/config/Zed/Oms', # this line must be added if your use unmodified ForeignPaymentStateMachine01.xml
];
$config[OmsConstants::ACTIVE_PROCESSES] = [
    //...
    'ForeignPaymentStateMachine01', # this line must be added or add your modified version of this OMS
];
$config[SalesConstants::PAYMENT_METHOD_STATEMACHINE_MAPPING] = [
    //...
    PaymentConfig::PAYMENT_FOREIGN_PROVIDER => 'ForeignPaymentStateMachine01', # this line must be added or add your modified version of this OMS
];

$config[MessageBrokerConstants::MESSAGE_TO_CHANNEL_MAP] = [
    //...
    AddPaymentMethodTransfer::class => 'payment-method-commands',
    DeletePaymentMethodTransfer::class => 'payment-method-commands',
    CancelPaymentTransfer::class => 'payment-commands',
    CapturePaymentTransfer::class => 'payment-commands',
    RefundPaymentTransfer::class => 'payment-commands',
    PaymentAuthorizedTransfer::class => 'payment-events',
    PaymentAuthorizationFailedTransfer::class => 'payment-events',
    PaymentCapturedTransfer::class => 'payment-events',
    PaymentCaptureFailedTransfer::class => 'payment-events',
    PaymentRefundedTransfer::class => 'payment-events',
    PaymentRefundFailedTransfer::class => 'payment-events',
    PaymentCanceledTransfer::class => 'payment-events',
    PaymentCancellationFailedTransfer::class => 'payment-events',

    # [Optional] This message can be received from your project when you want to use details of the Stripe App used payment.
    PaymentCreatedTransfer::class => 'payment-events',
];

$config[MessageBrokerConstants::CHANNEL_TO_RECEIVER_TRANSPORT_MAP] = [
    //...
    'payment-method-commands' => MessageBrokerAwsConfig::HTTP_CHANNEL_TRANSPORT,
    'payment-events' => MessageBrokerAwsConfig::HTTP_CHANNEL_TRANSPORT,
];

$config[MessageBrokerConstants::CHANNEL_TO_SENDER_TRANSPORT_MAP] = [
    //...
    'payment-commands' => MessageBrokerAwsConfig::HTTP_CHANNEL_TRANSPORT,
];
  1. In src/Pyz/Zed/MessageBroker/MessageBrokerDependencyProvider.php, add or update the config of the Message Broker dependency provider:

namespace Pyz\Zed\MessageBroker;

use Spryker\Zed\MessageBroker\MessageBrokerDependencyProvider as SprykerMessageBrokerDependencyProvider;
use Spryker\Zed\Payment\Communication\Plugin\MessageBroker\PaymentOperationsMessageHandlerPlugin;
use Spryker\Zed\Payment\Communication\Plugin\MessageBroker\PaymentMethodMessageHandlerPlugin;
use Spryker\Zed\SalesPaymentDetail\Communication\Plugin\MessageBroker\PaymentCreatedMessageHandlerPlugin;

class MessageBrokerDependencyProvider extends SprykerMessageBrokerDependencyProvider
{
    /**
     * @return array<\Spryker\Zed\MessageBrokerExtension\Dependency\Plugin\MessageHandlerPluginInterface>
     */
    public function getMessageHandlerPlugins(): array
    {
        return [
            //...
            # These plugins are handling messages sent from Stripe app to your project.
            new PaymentOperationsMessageHandlerPlugin(),
            new PaymentMethodMessageHandlerPlugin(),

            # [Optional] This plugin is handling the `PaymentCreated` messages sent from Stripe App.
            new PaymentCreatedMessageHandlerPlugin(),
        ];
    }
}
  1. In src/Pyz/Zed/MessageBroker/MessageBrokerConfig.php, add or updated the channels config in the message broker config:
namespace Pyz\Zed\MessageBroker;

use Spryker\Zed\MessageBroker\MessageBrokerConfig as SprykerMessageBrokerConfig;

class MessageBrokerConfig extends SprykerMessageBrokerConfig
{
    /**
     * @return array<string>
     */
    public function getDefaultWorkerChannels(): array
    {
        return [
            //...
            'payment-events',
            'payment-method-commands',
        ];
    }

    //...
}
  1. In src/Pyz/Zed/Oms/OmsDependencyProvider.php, add or update the OMS config:
use Spryker\Zed\SalesPayment\Communication\Plugin\Oms\SendCapturePaymentMessageCommandPlugin;
use Spryker\Zed\SalesPayment\Communication\Plugin\Oms\SendRefundPaymentMessageCommandPlugin;
use Spryker\Zed\SalesPayment\Communication\Plugin\Oms\SendCancelPaymentMessageCommandPlugin;

//...

    /**
     * @param \Spryker\Zed\Kernel\Container $container
     *
     * @return \Spryker\Zed\Kernel\Container
     */
    protected function extendCommandPlugins(Container $container): Container
    {
         $container->extend(self::COMMAND_PLUGINS, function (CommandCollectionInterface $commandCollection) {
             //...
             $commandCollection->add(new SendCapturePaymentMessageCommandPlugin(), 'Payment/Capture');
             // These two commands will be also supported soon by ACP Stripe app.
             $commandCollection->add(new SendRefundPaymentMessageCommandPlugin(), 'Payment/Refund');
             $commandCollection->add(new SendCancelPaymentMessageCommandPlugin(), 'Payment/Cancel');

             return $commandCollection;
        });

        return $container;
    }
  1. In src/Pyz/Zed/Payment/PaymentDependencyProvider.php, add or update the following plugins:
// ...

use Spryker\Zed\OauthClient\Communication\Plugin\Payment\AccessTokenPaymentAuthorizeRequestExpanderPlugin;


    // ...

    /**
     * @return array<int, \Spryker\Zed\PaymentExtension\Dependency\Plugin\PaymentAuthorizeRequestExpanderPluginInterface>
     */
    protected function getPaymentAuthorizeRequestExpanderPlugins(): array
    {
        return [
            //...
            new AccessTokenPaymentAuthorizeRequestExpanderPlugin(),
        ];
    }

Next step

Connect and configure Stripe