Install the Gift Cards feature

Edit on GitHub

This document describes how to install the Gift Cards feature.

Install feature core

Follow the steps below to install the Gift Cards feature core.

Prerequisites

Install the required features:

NAME VERSION INSTALLATION GUIDE
Spryker Core 202410.0 Install the Spryker Core feature
Cart 202410.0 Install the Cart feature
Product 202410.0 Install the Product feature
Payments 202410.0 Install the Payments feature
Shipment 202410.0 Install the Shipment feature
Order Management 202410.0 Install the Order Management feature
Mailing & Notifications 202410.0 Install the Mailing & Notifications feature
Promotions & Discounts 202410.0 Install the Promotions & Discounts feature

1) Install the required modules

composer require spryker-feature/gift-cards:"202410.0" --update-with-dependencies
Verification

Make sure that the following modules have been installed:

MODULE EXPECTED DIRECTORY
CartCode vendor/spryker/cart-code
CartCodeExtension vendor/spryker/cart-code-extension
GiftCard vendor/spryker/gift-card
GiftCardBalance vendor/spryker/gift-card-balance
Nopayment vendor/spryker/nopayment

2) Set up the Gift Card purchase process

Extend your project with the following configuration:

src/Pyz/Zed/GiftCard/GiftCardConfig.php

<?php

namespace Pyz\Zed\GiftCard;

use Spryker\Shared\Shipment\ShipmentConfig;
use Spryker\Zed\GiftCard\GiftCardConfig as SprykerGiftCardConfig;

class GiftCardConfig extends SprykerGiftCardConfig
{
    /**
     * Provides a list of shipment method names that should be available in case there are only gift card items in the quote.
     *
     * @return array
     */
    public function getGiftCardOnlyShipmentMethods(): array
    {
        return [
            ShipmentConfig::SHIPMENT_METHOD_NAME_NO_SHIPMENT,
        ];
    }
}
Verification

When you finish the Setup Behaviour step, make sure that the NoShipment shipment method is selected automatically while ordering only a gift card.

3) Set up the Gift Card usage process

Extend your project with the following configuration:

config/Shared/config_default.php

<?php

use Spryker\Shared\Kernel\KernelConstants;
use Spryker\Shared\Nopayment\NopaymentConfig;
use Spryker\Shared\Nopayment\NopaymentConstants;
use Spryker\Shared\Oms\OmsConstants;
use Spryker\Shared\Sales\SalesConstants;
use Spryker\Zed\GiftCard\GiftCardConfig;

// ---------- Dependency injector
$config[KernelConstants::DEPENDENCY_INJECTOR_ZED] = [
    'Oms' => [
        GiftCardConfig::PROVIDER_NAME,
    ],
];

$config[NopaymentConstants::NO_PAYMENT_METHODS] = [
    NopaymentConfig::PAYMENT_PROVIDER_NAME,
];
$config[NopaymentConstants::WHITELIST_PAYMENT_METHODS] = [
    GiftCardConfig::PROVIDER_NAME,
];

// ---------- State machine (OMS)
$config[OmsConstants::ACTIVE_PROCESSES] = [
    'Nopayment01',
];
$config[SalesConstants::PAYMENT_METHOD_STATEMACHINE_MAPPING] = [
    GiftCardConfig::PROVIDER_NAME => 'DummyPayment01', // Order State Machine name of your choice
    NopaymentConfig::PAYMENT_PROVIDER_NAME => 'Nopayment01',
];

src/Pyz/Zed/GiftCard/GiftCardConfig.php

<?php

namespace Pyz\Zed\GiftCard;

use Spryker\Shared\DummyPayment\DummyPaymentConfig;
use Spryker\Zed\GiftCard\GiftCardConfig as SprykerGiftCardConfig;

class GiftCardConfig extends SprykerGiftCardConfig
{
    /**
     * Provides a list of payment method names that are disabled to use when the quote contains gift card item(s) to purchase.
     *
     * @return array
     */
    public function getGiftCardPaymentMethodBlacklist(): array
    {
        return [
            DummyPaymentConfig::PAYMENT_METHOD_INVOICE,
        ];
    }
}

src/Pyz/Zed/Sales/SalesConfig.php

<?php

namespace Pyz\Zed\Sales;

use Spryker\Zed\Sales\SalesConfig as SprykerSalesConfig;

class SalesConfig extends SprykerSalesConfig
{
    /**
     * @return array
     */
    public function getSalesDetailExternalBlocksUrls()
    {
        $projectExternalBlocks = [
            'giftCards' => '/gift-card/sales/list', // lists used gift cards for the order
        ];

        $externalBlocks = parent::getSalesDetailExternalBlocksUrls();

        return array_merge($externalBlocks, $projectExternalBlocks);
    }
}
Verification
When you finish the [Setup Behaviour](#install-the-required-modules) step, make sure the following: * The `NoPayment01` state machine is activated successfully. * When using a gift card to cover an entire order, the configured order state machine is used—for example, `Nopayment01`. * You can't use denied payment methods when using a gift card. * In the Back office, on the order details page, you see the gift cards used in the order.

4) Set up the database schema

Apply database changes and to generate entity and transfer changes:

console propel:install
console transfer:generate
Verification

Verify that the following changes have been applied by checking your database:

DATABASE ENTITY TYPE EVENT
spy_gift_card table created
spy_gift_card_product_abstract_configuration table created
spy_gift_card_product_abstract_configuration_link table created
spy_gift_card_product_configuration table created
spy_gift_card_product_configuration_link table created
spy_payment_gift_card table created
spy_gift_card_balance_log table created
spy_sales_order_item_gift_card table created

Make sure that propel entities have been generated successfully by checking their existence. Also, change the generated entity classes to extend from Spryker core classes.

CLASS PATH EXTENDS
src/Orm/Zed/GiftCard/Persistence/SpyGiftCard.php Spryker\Zed\GiftCard\Persistence\Propel\AbstractSpyGiftCard
src/Orm/Zed/GiftCard/Persistence/SpyGiftCardQuery.php Spryker\Zed\GiftCard\Persistence\Propel\AbstractSpyGiftCardQuery
src/Orm/Zed/GiftCard/Persistence/SpyGiftCardProductAbstractConfiguration.php Spryker\Zed\GiftCard\Persistence\Propel\AbstractSpyGiftCardProductAbstractConfiguration
src/Orm/Zed/GiftCard/Persistence/SpyGiftCardProductAbstractConfigurationQuery.php Spryker\Zed\GiftCard\Persistence\Propel\AbstractSpyGiftCardProductAbstractConfigurationQuery
src/Orm/Zed/GiftCard/Persistence/SpyGiftCardProductAbstractConfigurationLink.php Spryker\Zed\GiftCard\Persistence\Propel\AbstractSpyGiftCardProductAbstractConfigurationLink
src/Orm/Zed/GiftCard/Persistence/SpyGiftCardProductAbstractConfigurationLinkQuery.php Spryker\Zed\GiftCard\Persistence\Propel\AbstractSpyGiftCardProductAbstractConfigurationLink
src/Orm/Zed/GiftCard/Persistence/SpyGiftCardProductConfiguration.php Spryker\Zed\GiftCard\Persistence\Propel\AbstractSpyGiftCardProductConfiguration
src/Orm/Zed/GiftCard/Persistence/SpyGiftCardProductConfigurationQuery.php Spryker\Zed\GiftCard\Persistence\Propel\AbstractSpyGiftCardProductConfigurationQuery
src/Orm/Zed/GiftCard/Persistence/SpyGiftCardProductConfigurationLink.php Spryker\Zed\GiftCard\Persistence\Propel\AbstractSpyGiftCardProductConfigurationLink
src/Orm/Zed/GiftCard/Persistence/SpyGiftCardProductConfigurationLinkQuery.php Spryker\Zed\GiftCard\Persistence\Propel\AbstractSpyGiftCardProductConfigurationLinkQuery
src/Orm/Zed/GiftCard/Persistence/SpyPaymentGiftCard.php Spryker\Zed\GiftCard\Persistence\Propel\AbstractSpyPaymentGiftCard
src/Orm/Zed/GiftCard/Persistence/SpyPaymentGiftCardQuery.php Spryker\Zed\GiftCard\Persistence\Propel\AbstractSpyPaymentGiftCardQuery
src/Orm/Zed/GiftCardBalance/Persistence/SpyGiftCardBalanceLog.php Orm\Zed\GiftCardBalance\Persistence\Base\SpyGiftCardBalanceLog
src/Orm/Zed/GiftCardBalance/Persistence/SpyGiftCardBalanceLogQuery.php Orm\Zed\GiftCardBalance\Persistence\Base\SpyGiftCardBalanceLogQuery
src/Orm/Zed/Sales/Persistence/SpySalesOrderItemGiftCard.php Spryker\Zed\Sales\Persistence\Propel\AbstractSpySalesOrderItemGiftCard
Spryker\Zed\Sales\Persistence\Propel\AbstractSpySalesOrderItemGiftCardQuery

5) Import the Gift Card configuration data

Info

The following step imports abstract and concrete gift card configurations. Implementation for the data importer is not provided by Spryker Core, so you need to implement it on the project level.

You can find an exemplary implementation on GitHub in the suit repository (only Console and DataImport module changes are relevant). The following data import examples are based on this implementation.

data/import/gift_card_abstract_configuration.csv

abstract_sku,pattern
1234,{prefix}-{randomPart}-{suffix}
COLUMN REQUIRED DATA TYPE DATA EXAMPLE DATA EXPLANATION
abstract_sku mandatory string 1234 SKU reference of an abstract gift card product.
pattern mandatory string {prefix}-{randomPart}-{suffix} A pattern that is used to generate codes for purchased gift card codes.

data/import/gift_card_concrete_configuration.csv

sku,value
1234_1,1000
1234_2,2000
1234_3,5000
COLUMN REQUIRED DATA TYPE DATA EXAMPLE DATA EXPLANATION
sku string 1234 An SKU reference of an abstract gift card product.
value string {prefix}-{randomPart}-{suffix} A pattern that is used to generate codes for purchased gift card codes.
console data:import:gift-card-abstract-configuration
console data:import:gift-card-concrete-configuration
Verification

Make sure to have imported abstract and concrete gift card configuration into your spy_gift_card_product_abstract_configuration and spy_gift_card_product_configuration database tables.

6) Set up the shipment method data

Info

In this step, you create a shipment method called NoShipment. The name of the shipment method has to match the value of \Spryker\Shared\Shipment\ShipmentConfig::SHIPMENT_METHOD_NAME_NO_SHIPMENT constant.

  1. Taking into account project customizations, extend shipment method data importer as follows:

data/import/shipment.csv

shipment_method_key,name,carrier,taxSetName
spryker_no_shipment,NoShipment,NoShipment,Tax Exempt
  1. Taking into account project customizations, extend your shipment price data importer as follows:

data/import/shipment_price.csv

shipment_method_key,store,currency,value_net,value_gross
spryker_no_shipment,DE,EUR,0,0
  1. Apply changes:
console data:import:shipment
console data:import:shipment-price
Verification

Make sure that a shipment method with the NoShipment name exists in your spy_shipment_method and spy_shipment_method_price database tables.

7) Import additional and optional data

Info

To represent and display gift cards as products in your shop, you need to import some data into your database depending on your project configuration and needs. The following list contains the points that can be used to get an idea of what gift card-related data you might want to use:

  • Product Attribute Key to create a gift card value super attribute that defines gift card variants.
  • Abstract Product that represents gift cards in your catalog.
  • Abstract Product Store Relation to manage store-specific gift cards.
  • Concrete Product that represents gift cards with a specific price value.
  • Product Image for abstract and concrete products to display gift cards.
  • Product Price for concrete gift card products where the price value matches the “value” super attribute.
  • Product Stock data for concrete gift card products.
  • Product Management Attribute to define the previously created “value” product attribute for the PIM.
  • Category that represents all gift cards.
  • Navigation item to display the gift card category or gift card product details page directly.

8) Prepare order state machines for the Gift Card purchase process

Info

In this step, you can customize your order state machine to purchase gift cards. The process distinguishes gift card order items and ships them by emailing the customer. The following example shows how the DummyPayment state machine is defined.

The DummyPayment order state machine example:

config/Zed/oms/DummyPayment01.xml

<?xml version="1.0"?>
<statemachine
        xmlns="spryker:oms-01"
        xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
        xsi:schemaLocation="spryker:oms-01 http://static.spryker.com/oms-01.xsd">

    <process name="DummyPayment01" main="true">
        <subprocesses>
            <process>DummyRefund</process>
            <process>CreateGiftCard</process>
        </subprocesses>

        <states>
            <state name="new" reserved="true"/>
            <state name="payment pending" reserved="true"/>
            <state name="invalid">
                <flag>exclude from customer</flag>
            </state>
            <state name="cancelled">
                <flag>exclude from customer</flag>
            </state>
            <state name="paid" reserved="true"/>
            <state name="exported" reserved="true"/>
            <state name="confirmed" reserved="true"/>
            <state name="shipped" reserved="true"/>
            <state name="delivered"/>
            <state name="closed"/>
        </states>

        <transitions>
            <transition happy="true" condition="DummyPayment/IsAuthorized">
                <source>new</source>
                <target>payment pending</target>
                <event>authorize</event>
            </transition>

            <transition>
                <source>new</source>
                <target>invalid</target>
                <event>authorize</event>
            </transition>

            <transition happy="true" condition="DummyPayment/IsPayed">
                <source>payment pending</source>
                <target>paid</target>
                <event>pay</event>
            </transition>

            <transition>
                <source>payment pending</source>
                <target>cancelled</target>
                <event>pay</event>
            </transition>

            <transition happy="true">
                <source>paid</source>
                <target>confirmed</target>
                <event>confirm</event>
            </transition>

            <transition happy="true">
                <source>confirmed</source>
                <target>exported</target>
                <event>check giftcard purchase</event>
            </transition>

            <transition happy="true" condition="GiftCard/IsGiftCard">
                <source>confirmed</source>
                <target>gift card purchased</target>
                <event>check giftcard purchase</event>
            </transition>

            <transition happy="true">
                <source>gift card shipped</source>
                <target>delivered</target>
                <event>complete gift card creation</event>
            </transition>

            <transition happy="true">
                <source>exported</source>
                <target>shipped</target>
                <event>ship</event>
            </transition>

            <transition happy="true">
                <source>shipped</source>
                <target>delivered</target>
                <event>stock-update</event>
            </transition>

            <transition>
                <source>delivered</source>
                <target>ready for return</target>
                <event>return</event>
            </transition>

            <transition happy="true">
                <source>delivered</source>
                <target>closed</target>
                <event>close</event>
            </transition>

        </transitions>

        <events>
            <event name="authorize" onEnter="true"/>
            <event name="pay" manual="true" timeout="1 hour" command="DummyPayment/Pay"/>
            <event name="confirm" onEnter="true" manual="true" command="Oms/SendOrderConfirmation"/>
            <event name="export" onEnter="true" manual="true" command="Oms/SendOrderShipped"/>
            <event name="ship" manual="true" command="Oms/SendOrderShipped"/>
            <event name="stock-update" manual="true"/>
            <event name="close" manual="true" timeout="1 hour"/>
            <event name="return" manual="true" />
        </events>
    </process>

    <process name="DummyRefund" file="DummySubprocess/DummyRefund01.xml"/>
    <process name="CreateGiftCard" file="GiftCardSubprocess/CreateGiftCard01.xml"/>

</statemachine>

Dummy payment

config/Zed/oms/GiftCardSubprocess/CreateGiftCard01.xml
<?xml version="1.0"?>
<statemachine
        xmlns="spryker:oms-01"
        xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
        xsi:schemaLocation="spryker:oms-01 http://static.spryker.com/oms-01.xsd">

    <process name="CreateGiftCard">
        <states>
            <state name="gift card purchased"/>
            <state name="gift card created"/>
            <state name="gift card shipped"/>
        </states>

        <transitions>
            <transition happy="true">
                <source>gift card purchased</source>
                <target>gift card created</target>
                <event>create giftcard</event>
            </transition>

            <transition happy="true">
                <source>gift card created</source>
                <target>gift card shipped</target>
                <event>ship giftcard</event>
            </transition>

        </transitions>

        <events>
            <event name="check giftcard purchase" onEnter="true"/>
            <event name="create giftcard" onEnter="true" command="GiftCard/CreateGiftCard" />
            <event name="ship giftcard" onEnter="true" command="GiftCardMailConnector/ShipGiftCard" />
            <event name="complete gift card creation" onEnter="true" />
        </events>
    </process>
</statemachine>

config/Zed/oms/DummySubprocess/DummyRefund01.xml

<?xml version="1.0"?>
<statemachine
        xmlns="spryker:oms-01"
        xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
        xsi:schemaLocation="spryker:oms-01 http://static.spryker.com/oms-01.xsd">

    <process name="DummyRefund">

        <states>
            <state name="ready for return" />
            <state name="returned"/>
            <state name="refunded"/>
        </states>

        <transitions>
            <transition>
                <source>ready for return</source>
                <target>returned</target>
                <event>execute-return</event>
            </transition>

            <transition>
                <source>returned</source>
                <target>refunded</target>
                <event>refund</event>
            </transition>
        </transitions>

        <events>
            <event name="execute-return" onEnter="true"/>
            <event name="refund" manual="true" command="DummyPayment/Refund"/>
        </events>
    </process>

</statemachine>

Nopayment

9) Prepare order state machines for the Gift Card usage process

Info

In this step, you customize your order state machine to place orders with zero prices to pay (by using gift cards). The process skips payment-related steps because there is nothing for the customer to pay anymore. The following example shows how the NoPayment state machine is defined.

The NoPayment order state machine example:

config/Zed/oms/Nopayment01.xml
<?xml version="1.0"?>
<statemachine
        xmlns="spryker:oms-01"
        xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
        xsi:schemaLocation="spryker:oms-01 http://static.spryker.com/oms-01.xsd">

    <process name="Nopayment01" main="true">
        <subprocesses>
            <process>DummyRefund</process>
        </subprocesses>

        <states>
            <state name="new" reserved="true"/>
            <state name="paid" reserved="true"/>
            <state name="exported" reserved="true"/>
            <state name="shipped" reserved="true"/>
            <state name="delivered"/>
            <state name="closed"/>
        </states>

        <transitions>
            <transition happy="true">
                <source>new</source>
                <target>paid</target>
                <event>authorize</event>
            </transition>

            <transition happy="true">
                <source>paid</source>
                <target>exported</target>
                <event>export</event>
            </transition>

            <transition happy="true">
                <source>exported</source>
                <target>shipped</target>
                <event>ship</event>
            </transition>

            <transition happy="true">
                <source>shipped</source>
                <target>delivered</target>
                <event>stock-update</event>
            </transition>

            <transition>
                <source>delivered</source>
                <target>ready for return</target>
                <event>return</event>
            </transition>

            <transition happy="true">
                <source>delivered</source>
                <target>closed</target>
                <event>close</event>
            </transition>

        </transitions>

        <events>
            <event name="authorize" onEnter="true"/>
            <event name="export" onEnter="true" manual="true" command="Oms/SendOrderConfirmation"/>
            <event name="ship" manual="true" command="Oms/SendOrderShipped"/>
            <event name="stock-update" manual="true"/>
            <event name="close" manual="true" timeout="1 hour"/>
            <event name="return" manual="true" />
        </events>
    </process>

    <process name="DummyRefund" file="DummySubprocess/DummyRefund01.xml"/>

</statemachine>

Nopayment

10) Enable the gift card purchase process

Info

In this step, you enable gift card purchasing in your project.

Add the following plugins to your project:

PLUGIN SPECIFICATION PREREQUISITES NAMESPACE
GiftCardCalculatorPlugin During quote recalculation, distinguishes applicable and non-applicable gift cards and creates payment methods for applicable gift cards. - Spryker\Zed\GiftCard\Communication\Plugin
GiftCardMetadataExpanderPlugin Extends gift card items with gift card configuration metadata to change cart items. - Spryker\Zed\GiftCard\Communication\Plugin
GiftCardCheckoutDoSaveOrderPlugin Saves gift cards items from the quote. Saves gift card payments from the quote. - Spryker\Zed\GiftCard\Communication\Plugin\Checkout
GiftCardCheckoutPreConditionPlugin Returns true if QuoteTransfer.payments don’t have GiftCard payments. Returns true if gift card was in use before and amount is valid. Returns false otherwise. - \Spryker\Zed\GiftCard\Communication\Plugin\Checkout
NopaymentCheckoutPreConditionPlugin Returns true if there is no the Nopayment payment provider in QuoteTransfer.payments; otherwise, it does additional checks/logic. Returns true if QuoteTransfer.totals.priceToPay greater than 0 otherwise adds an error into CheckoutResponseTransfer and returns false. - \Spryker\Zed\Nopayment\Communication\Plugin\Checkout
GiftCardDiscountableItemFilterPlugin Filters gift card items from discountable items. - Spryker\Zed\GiftCard\Communication\Plugin
GiftCardDeliveryMailTypePlugin Provides a mail type for sending e-mails about successful gift card orders. - Spryker\Zed\GiftCardMailConnector\Communication\Plugin\Mail
Command\ShipGiftCardByEmailCommandPlugin Registers GiftCardMailConnector/ShipGiftCard OMS command that is used to deliver a gift card by e-mail. Use GiftCardDeliveryMailTypePlugin above to register the necessary mail type. Spryker\Zed\GiftCardMailConnector\Communication\Plugin\Oms
CreateGiftCardCommandPlugin Registers GiftCard/CreateGiftCard OMS command that is used to generate a new gift card based on a gift card order item configuration. - Spryker\Zed\GiftCard\Communication\Plugin\Oms\Command
IsGiftCardConditionPlugin Registers GiftCard/IsGiftCard OMS command that is used to check whether an order item is a gift card. - Spryker\Zed\GiftCard\Communication\Plugin\Oms\Condition
OnlyGiftCardShipmentMethodFilterPlugin Filters non-available shipment methods for gift card items to be purchased. - Spryker\Zed\GiftCard\Communication\Plugin

src/Pyz/Zed/Calculation/CalculationDependencyProvider.php

<?php

namespace Pyz\Zed\Calculation;

use Spryker\Zed\Calculation\CalculationDependencyProvider as SprykerCalculationDependencyProvider;
use Spryker\Zed\GiftCard\Communication\Plugin\GiftCardCalculatorPlugin;
use Spryker\Zed\Kernel\Container;

class CalculationDependencyProvider extends SprykerCalculationDependencyProvider
{
    /**
     * @param \Spryker\Zed\Kernel\Container $container
     *
     * @return \Spryker\Zed\CalculationExtension\Dependency\Plugin\CalculationPluginInterface[]
     */
    protected function getQuoteCalculatorPluginStack(Container $container)
    {
        return [
            new GiftCardCalculatorPlugin(),
        ];
    }
}

src/Pyz/Zed/Cart/CartDependencyProvider.php

<?php

namespace Pyz\Zed\Cart;

use Spryker\Zed\Cart\CartDependencyProvider as SprykerCartDependencyProvider;
use Spryker\Zed\GiftCard\Communication\Plugin\GiftCardMetadataExpanderPlugin;
use Spryker\Zed\Kernel\Container;

class CartDependencyProvider extends SprykerCartDependencyProvider
{
    /**
     * @param \Spryker\Zed\Kernel\Container $container
     *
     * @return \Spryker\Zed\Cart\Dependency\ItemExpanderPluginInterface[]
     */
    protected function getExpanderPlugins(Container $container)
    {
        return [
            new GiftCardMetadataExpanderPlugin(),
        ];
    }
}
src/Pyz/Zed/Checkout/CheckoutDependencyProvider.php
<?php

namespace Pyz\Zed\Checkout;

use Spryker\Zed\Checkout\CheckoutDependencyProvider as SprykerCheckoutDependencyProvider;
use Spryker\Zed\GiftCard\Communication\Plugin\Checkout\GiftCardCheckoutDoSaveOrderPlugin;
use Spryker\Zed\GiftCard\Communication\Plugin\Checkout\GiftCardCheckoutPreConditionPlugin;
use Spryker\Zed\Nopayment\Communication\Plugin\Checkout\NopaymentCheckoutPreConditionPlugin;
use Spryker\Zed\Kernel\Container;

class CheckoutDependencyProvider extends SprykerCheckoutDependencyProvider
{
    /**
     * @param \Spryker\Zed\Kernel\Container $container
     *
     * @return \Spryker\Zed\CheckoutExtension\Dependency\Plugin\CheckoutPreConditionPluginInterface[]
     */
    protected function getCheckoutPreConditions(Container $container)
    {
        return [
            ...
            new GiftCardCheckoutPreConditionPlugin(),
            new NopaymentCheckoutPreConditionPlugin(),
            ...
        ];
    }
    /**
     * @param \Spryker\Zed\Kernel\Container $container
     *
     * @return \Spryker\Zed\Checkout\Dependency\Plugin\CheckoutSaveOrderInterface[]|\Spryker\Zed\CheckoutExtension\Dependency\Plugin\CheckoutDoSaveOrderInterface[]
     */
    protected function getCheckoutOrderSavers(Container $container)
    {
        return [
            ...
            new GiftCardCheckoutDoSaveOrderPlugin(),
            ...
        ];
    }

    ...
}

src/Pyz/Zed/Discount/DiscountDependencyProvider.php

<?php

namespace Pyz\Zed\Discount;

use Spryker\Zed\Discount\DiscountDependencyProvider as SprykerDiscountDependencyProvider;
use Spryker\Zed\GiftCard\Communication\Plugin\GiftCardDiscountableItemFilterPlugin;

class DiscountDependencyProvider extends SprykerDiscountDependencyProvider
{
    /**
     * @return array
     */
    protected function getDiscountableItemFilterPlugins()
    {
        return [
            new GiftCardDiscountableItemFilterPlugin(),
        ];
    }
}

src/Pyz/Zed/Mail/MailDependencyProvider.php

<?php

namespace Pyz\Zed\Mail;

use Spryker\Zed\GiftCardMailConnector\Communication\Plugin\Mail\GiftCardDeliveryMailTypePlugin;
use Spryker\Zed\Kernel\Container;
use Spryker\Zed\Mail\Business\Model\Mail\MailTypeCollectionAddInterface;
use Spryker\Zed\Mail\MailDependencyProvider as SprykerMailDependencyProvider;

class MailDependencyProvider extends SprykerMailDependencyProvider
{
    /**
     * @param \Spryker\Zed\Kernel\Container $container
     *
     * @return \Spryker\Zed\Kernel\Container
     */
    public function provideBusinessLayerDependencies(Container $container)
    {
        $container = parent::provideBusinessLayerDependencies($container);

        $container->extend(static::MAIL_TYPE_COLLECTION, function (MailTypeCollectionAddInterface $mailCollection) {
            $mailCollection->add(new GiftCardDeliveryMailTypePlugin());

            return $mailCollection;
        });

        return $container;
    }
}
src/Pyz/Zed/Oms/OmsDependencyProvider.php
<?php

namespace Pyz\Zed\Oms;

use Spryker\Zed\GiftCard\Communication\Plugin\Oms\Command\CreateGiftCardCommandPlugin;
use Spryker\Zed\GiftCard\Communication\Plugin\Oms\Condition\IsGiftCardConditionPlugin;
use Spryker\Zed\GiftCardMailConnector\Communication\Plugin\Oms\Command\ShipGiftCardByEmailCommandPlugin;
use Spryker\Zed\Kernel\Container;
use Spryker\Zed\Oms\Dependency\Plugin\Command\CommandCollectionInterface;
use Spryker\Zed\Oms\Dependency\Plugin\Condition\ConditionCollectionInterface;
use Spryker\Zed\Oms\OmsDependencyProvider as SprykerOmsDependencyProvider;

class OmsDependencyProvider extends SprykerOmsDependencyProvider
{
    /**
     * @param \Spryker\Zed\Kernel\Container $container
     *
     * @return \Spryker\Zed\Kernel\Container
     */
    public function provideBusinessLayerDependencies(Container $container)
    {
        $container = parent::provideBusinessLayerDependencies($container);
        $container = $this->extendCommandPlugins($container);
        $container = $this->extendConditionPlugins($container);

        return $container;
    }

    /**
     * @param \Spryker\Zed\Kernel\Container $container
     *
     * @return \Spryker\Zed\Kernel\Container
     */
    protected function extendCommandPlugins(Container $container): Container
    {
        $container->extend(self::COMMAND_PLUGINS, function (CommandCollectionInterface $commandCollection) {
            $commandCollection->add(new ShipGiftCardByEmailCommandPlugin(), 'GiftCardMailConnector/ShipGiftCard');
            $commandCollection->add(new CreateGiftCardCommandPlugin(), 'GiftCard/CreateGiftCard');

            return $commandCollection;
        });

        return $container;
    }

    /**
     * @param \Spryker\Zed\Kernel\Container $container
     *
     * @return \Spryker\Zed\Kernel\Container
     */
    protected function extendConditionPlugins(Container $container): Container
    {
        $container->extend(OmsDependencyProvider::CONDITION_PLUGINS, function (ConditionCollectionInterface $conditionCollection) {
            $conditionCollection
                ->add(new IsGiftCardConditionPlugin(), 'GiftCard/IsGiftCard');

            return $conditionCollection;
        });

        return $container;
    }
}

src/Pyz/Zed/Shipment/ShipmentDependencyProvider.php

<?php

namespace Pyz\Zed\Shipment;

use Spryker\Zed\GiftCard\Communication\Plugin\OnlyGiftCardShipmentMethodFilterPlugin;
use Spryker\Zed\Kernel\Container;
use Spryker\Zed\Shipment\ShipmentDependencyProvider as SprykerShipmentDependencyProvider;

class ShipmentDependencyProvider extends SprykerShipmentDependencyProvider
{
    /**
     * @param \Spryker\Zed\Kernel\Container $container
     *
     * @return \Spryker\Zed\Shipment\Dependency\Plugin\ShipmentMethodFilterPluginInterface[]
     */
    protected function getMethodFilterPlugins(Container $container)
    {
        return [
            new OnlyGiftCardShipmentMethodFilterPlugin(),
        ];
    }
}
Verification

Make sure the following happens:

  • You can add a configured gift card product to the cart and purchase it.
  • The gift card item doesn’t have any discounts applied.
  • During the checkout process, shipment method selection is optional if there is only a gift card in the cart.
  • The GiftCart/ShipGiftCard OMS command is invoked, and the customer receives an email with the generated gift card code once the order is placed.

Before verifying these points, you must complete the feature frontend integration.

11) Enable the gift card code usage process

Info

In this step, you enable purchasing with existing gift cards in your project.

Add the following plugins to your project:

PLUGIN SPECIFICATION PREREQUISITES NAMESPACE
GiftCardCartCodePlugin Manages adding and removing gift card code from a quote. - Spryker\Client\GiftCard\Plugin\CartCode
GiftCardBalanceValueProviderPlugin Calculates the remaining balance of a gift card based on its usage history and returns its value. - Spryker\Zed\GiftCardBalance\Communication\Plugin
BalanceTransactionLogPaymentSaverPlugin Logs a gift card payment transaction. - Spryker\Zed\GiftCardBalance\Communication\Plugin
BalanceCheckerApplicabilityPlugin Calculates the remaining balance of a gift card based on its usage history and checks if the balance is positive. - Spryker\Zed\GiftCardBalance\Communication\Plugin
SendEmailToGiftCardUser Sends usage email notification to the user of the gift card. - Spryker\Zed\GiftCardMailConnector\Communication\Plugin\Checkout
GiftCardUsageMailTypePlugin Provides a mail type for sending gift card usage information emails. - Spryker\Zed\GiftCardMailConnector\Communication\Plugin\Mail
PriceToPayPaymentMethodFilterPlugin Filters available payment methods based on the price-to-pay value of the quote. - Spryker\Zed\Nopayment\Communication\Plugin\Payment
GiftCardPaymentMethodFilterPlugin Filters blacklisted payment methods in case the quote contains a gift card to be purchased. - Spryker\Zed\GiftCard\Communication\Plugin
GiftCardPaymentMapKeyBuilderStrategyPlugin Returns payment map key based on PaymentTransfer.paymentProvider, PaymentTransfer.paymentMethod and PaymentTransfer.giftCard.idGiftCard. - Spryker\Zed\GiftCard\Communication\Plugin\SalesPayment

src/Pyz/Client/CartCode/CartCodeDependencyProvider.php

<?php

namespace Pyz\Client\CartCode;

use Spryker\Client\CartCode\CartCodeDependencyProvider as SprykerCartCodeDependencyProvider;
use Spryker\Client\GiftCard\Plugin\CartCode\GiftCardCartCodePlugin;

class CartCodeDependencyProvider extends SprykerCartCodeDependencyProvider
{
    /**
     * @return \Spryker\Client\CartCodeExtension\Dependency\Plugin\CartCodePluginInterface[]
     */
    protected function getCartCodePluginCollection(): array
    {
        return [
            new GiftCardCartCodePlugin(),
        ];
    }
}

src/Pyz/Zed/Checkout/CheckoutDependencyProvider.php

<?php

namespace Pyz\Zed\Checkout;

use Spryker\Zed\Checkout\CheckoutDependencyProvider as SprykerCheckoutDependencyProvider;
use Spryker\Zed\GiftCardMailConnector\Communication\Plugin\Checkout\SendEmailToGiftCardUser;
use Spryker\Zed\Kernel\Container;

class CheckoutDependencyProvider extends SprykerCheckoutDependencyProvider
{
    ...

    /**
     * @param \Spryker\Zed\Kernel\Container $container
     *
     * @return \Spryker\Zed\Checkout\Dependency\Plugin\CheckoutPostSaveHookInterface[]
     */
    protected function getCheckoutPostHooks(Container $container)
    {
        return [
            ...
            new SendEmailToGiftCardUser(),
        ];
    }
}
src/Pyz/Zed/GiftCard/GiftCardDependencyProvider.php
<?php

namespace Pyz\Zed\GiftCard;

use Spryker\Zed\GiftCard\GiftCardDependencyProvider as SprykerGiftCardDependencyProvider;
use Spryker\Zed\GiftCardBalance\Communication\Plugin\BalanceCheckerApplicabilityPlugin;
use Spryker\Zed\GiftCardBalance\Communication\Plugin\BalanceTransactionLogPaymentSaverPlugin;
use Spryker\Zed\GiftCardBalance\Communication\Plugin\GiftCardBalanceValueProviderPlugin;

class GiftCardDependencyProvider extends SprykerGiftCardDependencyProvider
{
    /**
     * @return \Spryker\Zed\GiftCard\Dependency\Plugin\GiftCardValueProviderPluginInterface
     */
    protected function getValueProviderPlugin()
    {
        return new GiftCardBalanceValueProviderPlugin();
    }

    /**
     * @return \Spryker\Zed\GiftCard\Dependency\Plugin\GiftCardPaymentSaverPluginInterface[]
     */
    protected function getPaymentSaverPlugins()
    {
        return [
            new BalanceTransactionLogPaymentSaverPlugin(),
        ];
    }

    /**
     * @return \Spryker\Zed\GiftCard\Dependency\Plugin\GiftCardDecisionRulePluginInterface[]
     */
    protected function getDecisionRulePlugins()
    {
        return array_merge(parent::getDecisionRulePlugins(), [
            new BalanceCheckerApplicabilityPlugin(),
        ]);
    }
}

src/Pyz/Zed/Mail/MailDependencyProvider.php

<?php

namespace Pyz\Zed\Mail;
se Spryker\Zed\GiftCardMailConnector\Communication\Plugin\Mail\GiftCardUsageMailTypePlugin;
use Spryker\Zed\Kernel\Container;
use Spryker\Zed\Mail\Business\Model\Mail\MailTypeCollectionAddInterface;
use Spryker\Zed\Mail\MailDependencyProvider as SprykerMailDependencyProvider;

class MailDependencyProvider extends SprykerMailDependencyProvider
{
    /**
     * @param \Spryker\Zed\Kernel\Container $container
     *
     * @return \Spryker\Zed\Kernel\Container
     */
    public function provideBusinessLayerDependencies(Container $container)
    {
        $container = parent::provideBusinessLayerDependencies($container);

        $container->extend(static::MAIL_TYPE_COLLECTION, function (MailTypeCollectionAddInterface $mailCollection) {
            $mailCollection->add(new GiftCardUsageMailTypePlugin());

            return $mailCollection;
        });

        return $container;
    }
}

src/Pyz/Zed/Payment/PaymentDependencyProvider.php

<?php

namespace Pyz\Zed\Payment;

use Spryker\Zed\GiftCard\Communication\Plugin\GiftCardPaymentMethodFilterPlugin;
use Spryker\Zed\Kernel\Container;
use Spryker\Zed\Nopayment\Communication\Plugin\Payment\PriceToPayPaymentMethodFilterPlugin;
use Spryker\Zed\Payment\PaymentDependencyProvider as SprykerPaymentDependencyProvider;

class PaymentDependencyProvider extends SprykerPaymentDependencyProvider
{
    /**
     * @return \Spryker\Zed\Payment\Dependency\Plugin\Payment\PaymentMethodFilterPluginInterface[]
     */
    protected function getPaymentMethodFilterPlugins()
    {
        return [
            new PriceToPayPaymentMethodFilterPlugin(),
            new GiftCardPaymentMethodFilterPlugin(),
        ];
    }
}

src/Pyz/Zed/SalesPayment/SalesPaymentDependencyProvider.php

<?php

namespace Pyz\Zed\SalesPayment;

use Spryker\Zed\GiftCard\Communication\Plugin\SalesPayment\GiftCardPaymentMapKeyBuilderStrategyPlugin;
use Spryker\Zed\SalesPayment\SalesPaymentDependencyProvider as SprykerSalesPaymentDependencyProvider;

class SalesPaymentDependencyProvider extends SprykerSalesPaymentDependencyProvider
{
    /**
     * @return array<\Spryker\Zed\SalesPaymentExtension\Dependency\Plugin\PaymentMapKeyBuilderStrategyPluginInterface>
     */
    protected function getPaymentMapKeyBuilderStrategyPlugins(): array
    {
        return [
            new GiftCardPaymentMapKeyBuilderStrategyPlugin(),
        ];
    }
}
Verification

Make sure the following happens:

  • You can activate a gift card using its generated code.
  • You can activate more than one gift card simultaneously using its generated codes.
  • You can’t activate a gift card, the balance of which has been depleted.
  • During the checkout process, payment method selection is skipped in case the gift card covers the grand total.
  • Having made a successful purchase with the help of a gift card, you receive a gift card balance notification e-mail.

Before verifying these points, you must complete the feature frontend integration.

Install feature frontend

Follow the steps below to install the Gift Cards feature frontend.

Prerequisites

Install the required features:

NAME VERSION INSTALLATION GUIDE
Spryker Core 202410.0 Install the Spryker Core feature
Cart 202410.0 Install the Cart feature
Checkout 202410.0 Install the Checkout feature

1) Install the required modules

composer require spryker-feature/gift-cards:"202410.0" --update-with-dependencies
Verification

Make sure that the following modules have been installed:

MODULE EXPECTED DIRECTORY
CartCodeWidget vendor/spryker-shop/cart-code-widget
GiftCardWidget vendor/spryker-shop/gift-card-widget

2) Set up configuration

Extend your project with the following configuration:

config/Shared/config_default.php

<?php

use Spryker\Shared\Kernel\KernelConstants;
use Spryker\Shared\Nopayment\NopaymentConfig;

// ---------- Dependency injector
$config[KernelConstants::DEPENDENCY_INJECTOR_YVES] = [
    'CheckoutPage' => [
        NopaymentConfig::PAYMENT_PROVIDER_NAME,
    ],
];
Verification

Make sure to have the nopayment payment method successfully selected when you cover an entire order with a gift card.

3) Add translations

  1. Append glossary according to your configuration:

src/data/import/glossary.csv

cart.total.price_to_pay,Zu bezahlender Betrag,de_DE
cart.total.price_to_pay,Price to pay,en_US
cart.giftcard.label,Gift card,en_US
cart.giftcard.label,Geschenkgutschein,de_DE
cart.giftcard.apply.failed,The gift card is not applicable,en_US
cart.giftcard.apply.failed,Geschenkgutschein konnte nicht angewendet werden,de_DE
cart.giftcard.apply.successful,Your gift card code has been applied,en_US
cart.giftcard.apply.successful,Ihr Geschenkgutschein wurde angewendet,de_DE
cart.voucher.apply.successful,Your voucher code has been applied,en_US
cart.voucher.apply.successful,Ihr Gutscheincode wurde angewendet,de_DE
cart.code.apply.failed,Code could not be applied,en_US
cart.code.apply.failed,Gutscheincode konnte nicht angewendet werden,de_DE
general.next.button,Next,en_US
general.next.button,Weiter,de_DE
checkout.giftcard.label,Gift card,en_US
checkout.giftcard.label,Geschenkgutschein,de_DE
roduct.attribute.value,Value,en_US
product.attribute.value,Der Wert,de_DE
mail.giftCard.delivery.subject,Your Gift card!,en_US
mail.giftCard.delivery.subject,Deine Geschenkkarte!,de_DE
mail.giftCard.delivery.text,"Sehr geehrter Kunde, vielen Dank für den Kauf einer Geschenkgutschein in unserem Shop. Ihr Gutscheincode lautet: ",de_DE
mail.giftCard.delivery.text,"Dear customer, thank you for buying a gift card at our shop. Your gift card code is: ",en_US
mail.giftCard.usage.subject,Thank you for using a Gift Card!,en_US
mail.giftCard.usage.subject,Vielen Dank dass Sie ein Geschenkgutschein benutzt haben.,de_DE
cart.code.enter-code,Gutscheincode/Geschenkgutscheincode eingeben,de_DE
cart.code.enter-code,Enter voucher/gift card code,en_US
  1. Apply glossary keys:
console data:import:glossary
Verification

Make sure that, in the database, the configured data has been added to the spy_glossary table.

4) Set up widgets

Register the following global widget:

WIDGET SPECIFICATION NAMESPACE
CartCodeFormWidget Provides a cart code activation form. SprykerShop\Yves\CartCodeWidget\Widget

src/Pyz/Yves/ShopApplication/ShopApplicationDependencyProvider.php

<?php

namespace Pyz\Yves\ShopApplication;

use SprykerShop\Yves\CartCodeWidget\Widget\CartCodeFormWidget;
use SprykerShop\Yves\ShopApplication\ShopApplicationDependencyProvider as SprykerShopApplicationDependencyProvider;

class ShopApplicationDependencyProvider extends SprykerShopApplicationDependencyProvider
{
    /**
     * @return string[]
     */
    protected function getGlobalWidgets(): array
    {
        return [
            CartCodeFormWidget::class,
        ];
    }
}
Verification

Make sure that the widget is displayed on the Cart and Summary pages of the checkout process.

5) Enable the route list

Register the following route provider plugin:

PROVIDER NAMESPACE
CartCodeWidgetRouteProviderPlugin SprykerShop\Yves\CartCodeWidget\Plugin\Router

src/Pyz/Yves/Router/RouterDependencyProvider.php

<?php

namespace Pyz\Yves\Router;

use Spryker\Yves\Router\RouterDependencyProvider as SprykerRouterDependencyProvider;
use SprykerShop\Yves\CartCodeWidget\Plugin\Router\CartCodeWidgetRouteProviderPlugin;

class RouterDependencyProvider extends SprykerRouterDependencyProvider
{
    /**
     * @return \Spryker\Yves\RouterExtension\Dependency\Plugin\RouteProviderPluginInterface[]
     */
    protected function getRouteProvider(): array
    {
        return [
            new CartCodeWidgetRouteProviderPlugin(),
        ];
    }
}
Verification

Make sure that a valid gift card code can be added and removed from the cart by submitting the cart code form (activated by the previous step).