Spryker Core feature integration

Last updated: September 14, 2020

Edit on GitHub

You are browsing a previous version of the document. The latest version is Upcoming release.

Included features

The following feature integration guide expects the basic feature to be in place. The current feature integration guide only adds the following functionalities:

```
Vault
```
```
Redis Session
```
```
Store GUI
```

Install Feature Core

Follow the steps below to install Spryker Core feature core.

1) Install the required modules using Composer

Run the following command to install the required modules:

composer require "spryker-feature/spryker-core": "dev-master"

Verification

2) Set up Database Schema and Transfer Objects

Run the following commands to apply database changes and generate entity and transfer changes:

console transfer:generate
console propel:install
console transfer:generate

Verification

Make sure that the following changes have been applied by checking your database:

Database Entity	Type	Event
`spy_vault_deposit`	table	created

Verification

3) Set up Configuration

Set up the following configuration.

Vault

Add the following configuration to your project:

Configuration	Specification	Namespace
`VaultConstants::ENCRYPTION_KEY`	Encrypts vault data.	`Spryker\Shared\Vault`

Security measures

Make sure that the encryption key is secured in your live environment. This key protects all data stored in the Vault.

config/Shared/config_local.php

<?php
 
use Spryker\Shared\Vault\VaultConstants;
 
$config[VaultConstants::ENCRYPTION_KEY] = "PLEASE ADJUST THIS ENCRYPTION KEY TO SECURE ONE"

Verification

Having finished integrating the feature, make sure that you can store and retrieve data from the vault using VaultFacade. Example:

$secret = "actual_secret";
 
$vaultFacade->store("secret_category", "secret_id", $secret);
 
assertSame($secret, $vaultFacade->retrieve("secret_category", "secret_id"));

Redis

Add the configuration to your project:

Deprecated	Specification	Replaced by
`SessionRedisConstants::LOCKING_TIMEOUT_MILLISECONDS`	Defines Redis lock timeout in milliseconds.	`Spryker\Shared\SessionRedis`
`SessionRedisConstants::LOCKING_RETRY_DELAY_MICROSECONDS`	Defines the retry delay between the attempts to acquire Redis lock in microseconds.	`Spryker\Shared\SessionRedis`
`SessionRedisConstants::LOCKING_LOCK_TTL_MILLISECONDS`	Defines the time to live for Redis lock in milliseconds.	`Spryker\Shared\SessionRedis`
`SessionFileConstants::ZED_SESSION_FILE_PATH`	Defines the filesystem path for storing Zed sessions.	`Spryker\Shared\SessionFile`
`SessionRedisConstants::ZED_SESSION_REDIS_PROTOCOL`	Defines the protocol used while connecting to Redis as Zed session storage.	`Spryker\Shared\SessionRedis`
`SessionRedisConstants::ZED_SESSION_REDIS_PASSWORD`	Defines the password used while connecting to Redis as Zed session storage.	`Spryker\Shared\SessionRedis`
`SessionRedisConstants::ZED_SESSION_REDIS_HOST`	Defines the host used while connecting to Redis as Zed session storage.	`Spryker\Shared\SessionRedis`
`SessionRedisConstants::ZED_SESSION_REDIS_PORT`	Defines the protocol used while connecting to Redis as Zed session storage.	`Spryker\Shared\SessionRedis`
`SessionRedisConstants::ZED_SESSION_REDIS_DATABASE`	Defines the database used while connecting to Redis as Zed session storage.	`Spryker\Shared\SessionRedis`
`SessionRedisConstants::ZED_SESSION_REDIS_DATA_SOURCE_NAMES`	Defines the list of DSNs used while connecting to Redis as Zed session storage in replication mode.	`Spryker\Shared\SessionRedis`
`SessionRedisConstants::ZED_SESSION_REDIS_CLIENT_OPTIONS`	Defines the list of client options used while connecting to Redis as Zed session storage in replication mode.	`Spryker\Shared\SessionRedis`
`StorageRedisConstants::STORAGE_REDIS_PROTOCOL`	Defines the protocol used while connecting to Redis as key-value storage.	`Spryker\Shared\StorageRedis`
`StorageRedisConstants::STORAGE_REDIS_PASSWORD`	Defines the password used while connecting to Redis as key-value storage.	`Spryker\Shared\StorageRedis`
`StorageRedisConstants::STORAGE_REDIS_HOST`	Defines the host used while connecting to Redis as key-value storage.	`Spryker\Shared\StorageRedis`
`StorageRedisConstants::STORAGE_REDIS_PORT`	Defines the port used while connecting to Redis as key-value storage.	`Spryker\Shared\StorageRedis`
`StorageRedisConstants::STORAGE_REDIS_DATABASE`	Defines the database used while connecting to Redis as key-value storage.	`Spryker\Shared\StorageRedis`
`StorageRedisConstants::STORAGE_REDIS_PERSISTENT_CONNECTION`	Enables/disables data persistence for a Redis connection.	`Spryker\Shared\StorageRedis`
`StorageRedisConstants::STORAGE_REDIS_DATA_SOURCE_NAMES`	Specifies an array of DSN strings for a multi-instance cluster/replication Redis setup.	`Spryker\Shared\StorageRedis`
`StorageRedisConstants::STORAGE_REDIS_CONNECTION_OPTIONS`	Specifies an array of client options for connecting to Redis as key-value storage.	`Spryker\Shared\StorageRedis`

General Storage

In case of multi-instance Redis setup, extend your project with the following configuration:

config/Shared/config_default.php

<?php
 
use Spryker\Shared\StorageRedis\StorageRedisConstants;
 
// ---------- KV storage
$config[StorageRedisConstants::STORAGE_REDIS_DATA_SOURCE_NAMES] = ['tcp://127.0.0.1:10009', 'tcp://10.0.0.1:6379'];
$config[StorageRedisConstants::STORAGE_REDIS_CONNECTION_OPTIONS] = [
    'replication' => 'sentinel',
    'service' => 'mymaster',
    'parameters' => [
        'password' => 'secret',
        'database' => 0,
    ],
];

Note

This configuration is used exclusively. In other words, you can't use any other Redis configuration.

In case of single-instance Redis setup, extend your project with the following configuration:

config/Shared/config_default.php

<?php
 
use Spryker\Shared\StorageRedis\StorageRedisConstants;
 
// ---------- KV storage
$config[StorageRedisConstants::STORAGE_REDIS_PERSISTENT_CONNECTION] = true;
$config[StorageRedisConstants::STORAGE_REDIS_PROTOCOL] = 'tcp';
$config[StorageRedisConstants::STORAGE_REDIS_HOST] = '127.0.0.1';
$config[StorageRedisConstants::STORAGE_REDIS_PORT] = 6379;
$config[StorageRedisConstants::STORAGE_REDIS_PASSWORD] = false;
$config[StorageRedisConstants::STORAGE_REDIS_DATABASE] = 0;

Note

All the values in the examples above should be replaced with the real ones used in the corresponding environment.

Session Storage

If you’re using Redis as session storage, extend your project with the following configuration:

config/Shared/config_default.php

<?php
 
use Spryker\Shared\Session\SessionConfig;
use Spryker\Shared\Session\SessionConstants;
use Spryker\Shared\SessionRedis\SessionRedisConfig;
use Spryker\Shared\SessionRedis\SessionRedisConstants;
 
// ---------- Session
$config[SessionConstants::ZED_SESSION_SAVE_HANDLER] = SessionRedisConfig::SESSION_HANDLER_REDIS;
$config[SessionRedisConstants::ZED_SESSION_TIME_TO_LIVE] = SessionConfig::SESSION_LIFETIME_1_HOUR;
$config[SessionRedisConstants::LOCKING_TIMEOUT_MILLISECONDS] = 0;
$config[SessionRedisConstants::LOCKING_RETRY_DELAY_MICROSECONDS] = 0;
$config[SessionRedisConstants::LOCKING_LOCK_TTL_MILLISECONDS] = 0;

Note

`SessionRedisConfig::SESSION_HANDLER_REDIS_LOCKING` and `SessionRedisConfig::SESSION_HANDLER_REDIS` can be used as values for `SessionConstants::ZED_SESSION_SAVE_HANDLER`.

In case of a multi-instance Redis setup, extend your project with the following configuration:

config/Shared/config_default.php

<?php
 
use Spryker\Shared\SessionRedis\SessionRedisConstants;
 
$config[SessionRedisConstants::ZED_SESSION_REDIS_DATA_SOURCE_NAMES] = ['tcp://127.0.0.1:10009', 'tcp://10.0.0.1:6379'];
$config[SessionRedisConstants::ZED_SESSION_REDIS_CLIENT_OPTIONS] = [
    'replication' => 'sentinel',
    'service' => 'mymaster',
    'parameters' => [
        'password' => 'secret',
        'database' => 2,
    ],
];

Note

This configuration is used exclusively. In other words, you can't use any other Redis configuration.

In case of a single-instance Redis setup, extend your project with the following configuration:

config/Share/config_default.php

<?php
 
use Spryker\Shared\SessionRedis\SessionRedisConstants;
 
$config[SessionRedisConstants::ZED_SESSION_REDIS_PROTOCOL] = 'tcp';
$config[SessionRedisConstants::ZED_SESSION_REDIS_HOST] = '127.0.0.1';
$config[SessionRedisConstants::ZED_SESSION_REDIS_PORT] = 6379;
$config[SessionRedisConstants::ZED_SESSION_REDIS_PASSWORD] = false;
$config[SessionRedisConstants::ZED_SESSION_REDIS_DATABASE] = 2;

If you’re using file system as session storage, extend your project with the following configuration:

config/Shared/config_default.php

<?php
 
use Spryker\Shared\Session\SessionConfig;
use Spryker\Shared\Session\SessionConstants;
use Spryker\Shared\SessionFile\SessionFileConfig;
use Spryker\Shared\SessionFile\SessionFileConstants;
 
// ---------- Session
$config[SessionConstants::ZED_SESSION_SAVE_HANDLER] = SessionFileConfig::SESSION_HANDLER_FILE;
$config[SessionFileConstants::ZED_SESSION_TIME_TO_LIVE] = SessionConfig::SESSION_LIFETIME_1_HOUR;
$config[SessionFileConstants::ZED_SESSION_FILE_PATH] = session_save_path();

Note

All the values in the examples above should be replaced with the real ones used in the corresponding environment.

4) Set up Behavior

Set up behavior as follows:

Install the following plugins with modules:

Plugin	Specification	Prerequisites	Namespace
`SessionHandlerRedisProviderPlugin`	Provides a Redis-based session handler implementation for Zed sessions.	None	`Spryker\Zed\SessionRedis\Communication\Plugin\Session`
`SessionHandlerRedisLockingProviderPlugin`	Provides a Redis-based session handler implementation with session locking for Zed sessions.	None	`Spryker\Zed\SessionRedis\Communication\Plugin\Session`
`SessionHandlerFileProviderPlugin`	Provides a file-based session handler implementation for Zed sessions.	None	`Spryker\Zed\SessionFile\Communication\Plugin\Session`
`ZedSessionRedisLockReleaserPlugin`	Removes session lock from Redis by session id for Zed sessions. It’s used when removing previously created locks by running the `session:lock:remove` console command.	None	`Spryker\Zed\SessionRedis\Communication\Plugin\Session`
`StorageRedisPlugin`	Provides a Redis-based storage implementation.	None	`Spryker\Client\StorageRedis\Plugin`

src/Pyz/Zed/Session/SessionDependencyProvider.php

<?php
 
namespace Pyz\Zed\Session;
 
use Spryker\Zed\Session\SessionDependencyProvider as SprykerSessionDependencyProvider;
use Spryker\Zed\SessionFile\Communication\Plugin\Session\SessionHandlerFileProviderPlugin;
use Spryker\Zed\SessionRedis\Communication\Plugin\Session\SessionHandlerRedisLockingProviderPlugin;
use Spryker\Zed\SessionRedis\Communication\Plugin\Session\SessionHandlerRedisProviderPlugin;
use Spryker\Zed\SessionRedis\Communication\Plugin\Session\ZedSessionRedisLockReleaserPlugin;
 
class SessionDependencyProvider extends SprykerSessionDependencyProvider
{
    /**
     * @return \Spryker\Shared\SessionExtension\Dependency\Plugin\SessionHandlerProviderPluginInterface[]
     */
    protected function getSessionHandlerPlugins(): array
    {
        return [
            new SessionHandlerRedisProviderPlugin(),
            new SessionHandlerRedisLockingProviderPlugin(),
            new SessionHandlerFileProviderPlugin(),
        ];
    }
 
    /**
     * @return \Spryker\Zed\SessionExtension\Dependency\Plugin\SessionLockReleaserPluginInterface[]
     */
    protected function getZedSessionLockReleaserPlugins(): array
    {
        return [
            new ZedSessionRedisLockReleaserPlugin(),
        ];
    }
}

src/Pyz/Client/Storage/StorageDependencyProvider.php

<?php
 
namespace Pyz\Client\Storage;
 
use Spryker\Client\Storage\StorageDependencyProvider as SprykerStorageDependencyProvider;
use Spryker\Client\StorageExtension\Dependency\Plugin\StoragePluginInterface;
use Spryker\Client\StorageRedis\Plugin\StorageRedisPlugin;
 
class StorageDependencyProvider extends SprykerStorageDependencyProvider
{
    /**
     * @return \Spryker\Client\StorageExtension\Dependency\Plugin\StoragePluginInterface|null
     */
    protected function getStoragePlugin(): ?StoragePluginInterface
    {
        return new StorageRedisPlugin();
    }
}

Verification

Visit `zed.mysprykershop.com` and make sure that Zed boots up without errors.

Set up the console commands:

Command	Specification	Prerequisites	Namespace
`StorageRedisExportRdbConsole`	Exports Redis database as an rdb file.	None	`Spryker\Zed\StorageRedis\Communication\Console`
`StorageRedisImportRdbConsole`	Imports an rdb file.	None	`Spryker\Zed\StorageRedis\Communication\Console`

Pyz\Zed\Console\ConsoleDependencyProvider

<?php
 
namespace Pyz\Zed\Console;
 
use Spryker\Zed\Kernel\Container;
use Spryker\Zed\Console\ConsoleDependencyProvider as SprykerConsoleDependencyProvider;
use Spryker\Zed\StorageRedis\Communication\Console\StorageRedisExportRdbConsole;
use Spryker\Zed\StorageRedis\Communication\Console\StorageRedisImportRdbConsole;
 
class ConsoleDependencyProvider extends SprykerConsoleDependencyProvider
{
    /**
     * @param \Spryker\Zed\Kernel\Container $container
     *
     * @return \Symfony\Component\Console\Command\Command[]
     */
    protected function getConsoleCommands(Container $container)
    {
        $commands = [
            new StorageRedisExportRdbConsole(),
            new StorageRedisImportRdbConsole(),
        ];
 
        return $commands;
    }
}

Verification

To verify that `StorageRedisExportRdbConsole` and `StorageRedisImportRdbConsole` are activated, check if `vendor/bin/console storage:redis:export-rdb` and `vendor/bin/console storage:redis:import-rdb` console commands exist.

Run the following command to build navigation cache:

vendor/bin/console navigation:build-cache

Verification

Make sure that the navigation for Store GUI is successfully generated by checking that, in the Back Office, the Administration menu item is present in the side bar and it has a Stores sub-item.

5) Set up Publish and Synchronize

Follow the steps to set up Publish and Synchronize:

Change RabbitMqConfig:

Pyz/Client/RabbitMq/RabbitMqConfig.php

<?php
 
namespace Pyz\Client\RabbitMq;
 
use Spryker\Client\RabbitMq\RabbitMqConfig as SprykerRabbitMqConfig;
use Spryker\Shared\Event\EventConfig;
use Spryker\Shared\Event\EventConstants;
use Spryker\Shared\GlossaryStorage\GlossaryStorageConfig;
use Spryker\Shared\Log\LogConstants;
use Spryker\Shared\UrlStorage\UrlStorageConstants;
 
class RabbitMqConfig extends SprykerRabbitMqConfig
{
    /**
     *  QueueNameFoo, // Queue => QueueNameFoo, (Queue and error queue will be created: QueueNameFoo and QueueNameFoo.error)
     *  QueueNameBar => [
     *       RoutingKeyFoo => QueueNameBaz, // (Additional queues can be defined by several routing keys)
     *   ],
     *
     * @see https://www.rabbitmq.com/tutorials/amqp-concepts.html
     *
     * @return array
     */
    protected function getQueueConfiguration(): array
    {
        return [
            EventConstants::EVENT_QUEUE => [
                EventConfig::EVENT_ROUTING_KEY_RETRY => EventConstants::EVENT_QUEUE_RETRY,
                EventConfig::EVENT_ROUTING_KEY_ERROR => EventConstants::EVENT_QUEUE_ERROR,
            ],
            GlossaryStorageConfig::SYNC_STORAGE_TRANSLATION,
            UrlStorageConstants::URL_SYNC_STORAGE_QUEUE,
            $this->get(LogConstants::LOG_QUEUE_NAME),
            // ...
        ];
    }
 
    /**
     * @return string
     */
    protected function getDefaultBoundQueueNamePrefix(): string
    {
        return 'error';
    }
}

Add PublisherTriggerEventsConsole to ConsoleDependencyProvider: Pyz/Zed/Console/ConsoleDependencyProvider.php

<?php
 
namespace Pyz\Zed\Console;
 
use Spryker\Zed\Console\ConsoleDependencyProvider as SprykerConsoleDependencyProvider;
use Spryker\Zed\Publisher\Communication\Console\PublisherTriggerEventsConsole;
 
class ConsoleDependencyProvider extends SprykerConsoleDependencyProvider
{
    /**
     * @param \Spryker\Zed\Kernel\Container $container
     *
     * @return \Symfony\Component\Console\Command\Command[]
     */
    protected function getConsoleCommands(Container $container)
    {
        $commands = [
            // ...
            new PublisherTriggerEventsConsole(),
            // ...
        ];
        // ...
    }
}

Add PublisherSubscriber to EventDependencyProvider:

src/Pyz/Zed/Event/EventDependencyProvidder.php

<?php
 
namespace Pyz\Zed\Event;
 
use Spryker\Zed\Event\EventDependencyProvider as SprykerEventDependencyProvider;
use Spryker\Zed\Publisher\Communication\Plugin\Event\PublisherSubscriber;
 
class EventDependencyProvider extends SprykerEventDependencyProvider
{
    /**
     * @return \Spryker\Zed\Event\Dependency\EventSubscriberCollectionInterface
     */
    public function getEventSubscriberCollection()
    {
        $eventSubscriberCollection = parent::getEventSubscriberCollection();
        $eventSubscriberCollection->add(new GlossaryStorageEventSubscriber());
        $eventSubscriberCollection->add(new UrlStorageEventSubscriber());
        // ...
        $eventSubscriberCollection->add(new PublisherSubscriber());
 
        return $eventSubscriberCollection;
    }
}

Install feature frontend

Follow the steps below to install the front end of Spryker Core feature.

1) Install the required modules using Composer

Run the following command to install the required modules:

composer require "spryker-feature/spryker-core": "dev-master"

2) Set up Configuration

Add the following configuration to your project:

Configuration	Specification	Namespace
`SessionFileConstants::YVES_SESSION_FILE_PATH`	Defines the filesystem path for storing Yves sessions.	`Spryker\Shared\SessionFile`
`SessionRedisConstants::YVES_SESSION_REDIS_PROTOCOL`	Defines the protocol used while connecting to Redis as Yves session storage.	`Spryker\Shared\SessionRedis`
`SessionRedisConstants::YVES_SESSION_REDIS_PASSWORD`	Defines the password used while connecting to Redis as Yves session storage.	`Spryker\Shared\SessionRedis`
`SessionRedisConstants::YVES_SESSION_REDIS_HOST`	Defines the host used while connecting to Redis as Yves session storage.	`Spryker\Shared\SessionRedis`
`SessionRedisConstants::YVES_SESSION_REDIS_PORT`	Defines the port used while connecting to Redis as Yves session storage.	`Spryker\Shared\SessionRedis`
`SessionRedisConstants::YVES_SESSION_REDIS_DATABASE`	Defines the database used while connecting to Redis as Yves session storage.	`Spryker\Shared\SessionRedis`
`SessionRedisConstants::YVES_SESSION_REDIS_DATA_SOURCE_NAMES`	Defines the list of DSNs used while connecting to Redis as Yves session storage in replication mode.	`Spryker\Shared\SessionRedis`
`SessionRedisConstants::YVES_SESSION_REDIS_CLIENT_OPTIONS`	Defines the list of client options used while connection to Redis as Yves session storage in replication mode.	`Spryker\Shared\SessionRedis`

config/Shared/config_default.php

<?php
 
use Spryker\Shared\Session\SessionConfig;
use Spryker\Shared\Session\SessionConstants;
use Spryker\Shared\SessionRedis\SessionRedisConfig;
use Spryker\Shared\SessionRedis\SessionRedisConstants;
 
// ---------- Session
$config[SessionConstants::YVES_SESSION_SAVE_HANDLER] = SessionRedisConfig::SESSION_HANDLER_REDIS_LOCKING;
$config[SessionRedisConstants::YVES_SESSION_TIME_TO_LIVE] = SessionConfig::SESSION_LIFETIME_1_HOUR;

Note

`SessionRedisConfig::SESSION_HANDLER_REDIS_LOCKING` and `SessionRedisConfig::SESSION_HANDLER_REDIS` can be used as values for session handler configuration option.

In case of a multi-instance Redis setup, extend your project with the following configuration:

config/Shared/config_default.php

<?php
 
use Spryker\Shared\SessionRedis\SessionRedisConstants;
 
$config[SessionRedisConstants::YVES_SESSION_REDIS_DATA_SOURCE_NAMES] = ['tcp://127.0.0.1:10009', 'tcp://10.0.0.1:6379'];
$config[SessionRedisConstants::YVES_SESSION_REDIS_CLIENT_OPTIONS] = [
    'replication' => 'sentinel',
    'service' => 'mymaster',
    'parameters' => [
        'password' => 'secret',
        'database' => 1,
    ],
];

Note

This configuration is used exclusively. In other words, you can't use any other Redis configuration.

In case of a single-instance Redis setup, extend your project with the following configuration:

config/Share/config_default.php

<?php
 
use Spryker\Shared\SessionRedis\SessionRedisConstants;
 
$config[SessionRedisConstants::YVES_SESSION_REDIS_PROTOCOL] = 'tcp';
$config[SessionRedisConstants::YVES_SESSION_REDIS_HOST] = '127.0.0.1';
$config[SessionRedisConstants::YVES_SESSION_REDIS_PORT] = 6379;
$config[SessionRedisConstants::YVES_SESSION_REDIS_PASSWORD] = false;
$config[SessionRedisConstants::YVES_SESSION_REDIS_DATABASE] = 1;

Verification

Make sure you don't use the same Redis database for Yves and Zed sessions.

If you’re using file system as session storage, extend your project with the following configuration:

config/Shared/config_default.php

<?php
 
use Spryker\Shared\Session\SessionConfig;
use Spryker\Shared\Session\SessionConstants;
use Spryker\Shared\SessionFile\SessionFileConfig;
use Spryker\Shared\SessionFile\SessionFileConstants;
 
// ---------- Session
$config[SessionConstants::YVES_SESSION_SAVE_HANDLER] = SessionFileConfig::SESSION_HANDLER_FILE;
$config[SessionFileConstants::YVES_SESSION_TIME_TO_LIVE] = SessionConfig::SESSION_LIFETIME_1_HOUR;
$config[SessionFileConstants::YVES_SESSION_FILE_PATH] = session_save_path();

Note

All the values in the examples above should be replaced with the real ones used in the corresponding environment.

3) Set up Behavior

src/Pyz/Yves/Session/SessionDependencyProvider.php

<?php
 
namespace Pyz\Yves\Session;
 
use Spryker\Yves\Session\SessionDependencyProvider as SprykerSessionDependencyProvider;
use Spryker\Yves\SessionFile\Plugin\Session\SessionHandlerFileProviderPlugin;
use Spryker\Yves\SessionRedis\Plugin\Session\SessionHandlerRedisLockingProviderPlugin;
use Spryker\Yves\SessionRedis\Plugin\Session\SessionHandlerRedisProviderPlugin;
 
class SessionDependencyProvider extends SprykerSessionDependencyProvider
{
    /**
     * @return \Spryker\Shared\SessionExtension\Dependency\Plugin\SessionHandlerProviderPluginInterface[]
     */
    protected function getSessionHandlerPlugins(): array
    {
        return [
            new SessionHandlerRedisProviderPlugin(),
            new SessionHandlerRedisLockingProviderPlugin(),
            new SessionHandlerFileProviderPlugin(),
        ];
    }
}

src/Pyz/Zed/Session/SessionDependencyProvider.php

<?php
 
namespace Pyz\Zed\Session;
 
use Spryker\Zed\Session\SessionDependencyProvider as SprykerSessionDependencyProvider;
use Spryker\Zed\SessionFile\Communication\Plugin\Session\SessionHandlerFileProviderPlugin;
use Spryker\Zed\SessionRedis\Communication\Plugin\Session\SessionHandlerRedisLockingProviderPlugin;
use Spryker\Zed\SessionRedis\Communication\Plugin\Session\SessionHandlerRedisProviderPlugin;
use Spryker\Zed\SessionRedis\Communication\Plugin\Session\YvesSessionRedisLockReleaserPlugin;
use Spryker\Zed\SessionRedis\Communication\Plugin\Session\ZedSessionRedisLockReleaserPlugin;
 
class SessionDependencyProvider extends SprykerSessionDependencyProvider
{
    /**
     * @return \Spryker\Zed\SessionExtension\Dependency\Plugin\SessionLockReleaserPluginInterface[]
     */
    protected function getYvesSessionLockReleaserPlugins(): array
    {
        return [
            new YvesSessionRedisLockReleaserPlugin(),
        ];
    }
}

Verification

Visit `mysprykershop.com` and make sure that Yves boots up without errors.

Find the list of related feature integration guides below:

Feature	Link
Spryker Core API	Glue API: Spryker Core feature integration

Was this article helpful?

Tell us what could be better

Name (Optional)

Email (Optional) Invalid email format.

Type your thoughts here

We appreciate the time you took to share the feedback
and will consider it as soon as possible.

Thank you!

For submitting the form

Spryker Core feature integration

Install Feature Core

1) Install the required modules using Composer

2) Set up Database Schema and Transfer Objects

3) Set up Configuration

Vault

Redis

General Storage

Session Storage

4) Set up Behavior

5) Set up Publish and Synchronize

Install feature frontend

1) Install the required modules using Composer

2) Set up Configuration

3) Set up Behavior

Related Features

Thank you!